Interflux® - Modular Spray Fluxer Systems for Retrofit

home > products > Spray Fluxer Systems > Retrofit

	Search for:

product not found or
not listed?
try here

Interflux® offers the first modular Spray Fluxer Systems to suit even the most demanding wave soldering machines. The system consists of 3 Modules :

Spray Fluxer Module
	SL___SlimLine

	Dimension	Description
	L(560) x W(160) x H (165)mm	Auto width Sensor Backup Width Control Rodless Cylinder Spray Nozzle Air Knife Plug-in Connections

	USL___UltraSlimLine

	Dimension	Description
	L(580) x W(110) x H (110)mm	Easy access to manual Width Control Rodless Cylinder Spray Nozzle Plug-in Connections Ultra Slim Design which can be combined with a foam fluxer unit

	CP____Compact

	Dimension	Description
	L(562) x W(147) x H (98)mm	Economical Design Manual Width Control Rodless Cylinder Spray Nozzle Plug-in Connections

Control Module
	SC Module

	Dimension	Description
	L(300) x W(200) x H(350)mm	Incoming PCB SensorForward/Backward Glider Speed Control Manual Timing Setting Encoder Mode Single/Dual Spray Selection Flux Spray Pressure Regulator Auto-Width Sensor Capability

	DC Module

	Dimension	Description
	L(250) x W(160) x H(300)mm	Incoming PCB SensorForward/Backward Glider Speed Control Manual Timing Setting Single/Dual Spray Selection Flux Spray Pressure Regulator

Flux Infeed Module
	P__Pressurized Tank

	Dimension	Description
	Dia(229) x H (571.5)mm	Flux capacity: 19 liters Material : SS 316L Pressure Relief valve Pressure gauge Low level switch Shut off valve

	G__Gravity Tank

	Dimension	Description
	W(410) x D(164) x H(292)mm	9 litres Flux Tank in HDPE 1 litre Thinner Tank in HDPE for Maintenance Mounting Bracket Stainless Steel Valves Integrated Flux Flow Regulator

	S__Siphon Tube

	Dimension	Description
	L(520) mm	Flux Flow Regulator Stainless Steel Tube

Ensures good filling of the through holes
Not sensitive for overlapping
Low Spray Pressure
Suitable for VOC-Free Fluxes
Minimum Setup Time

Power Supply : VAC, 50/60 Hz, 25W
Compressed Air Supply : Clean, dry and oil free at 4~6 Bar, 100~ 120 l/min
Operating Condition : 18 ~ 50 °C
Exhaust Requirement : 350 CFM (adjustable)
Conveyor speed limit : 0 ~ 1.5 m/min
Nozzle Air Consumption : 0.046 m3/min at 1 Bar
Spraying Width : Full Cone Diameter of 60 mm at Spray Distance of 60mm
Spray Angle : 50° ~ 95° (70° at 1 Bar)
Spray Distance : 40 ~ 60 mm from PCBA bottom to top of nozzle
Glider Speed : 0 ~ 17 m/min at 0 ~ 400mm travel stroke.
Flux types : Water Soluble, No Clean, VOC-free, Low VOC.
Flux solids content (%) : up to 35%
Flux Flow Rate : 0 ~ 9.96 l/h at 1 bar (see below chart for details)
Flux Spray Pressure : 0 ~ 2.5 Bar
Medium droplet size : 50 ~ 100 mm depending on liquid flow rate and air pressure.
Deposition Uniformity : ± 15 %
Deposition Repeatability : ± 10 %

documents

Interflux offers the first Modular Spray Fluxer Systems to suit even the most demanding Wave Soldering Machines.

SPRAY WITH A CHOICE